Model Select "M-Sel - FUTABA 4PK-2.4GHZ Instruction Manual

Model Selection "M-SEL"
Forty model data (model data for 40 R/C cars) can be saved in the 4PK transmitter and
used when the relevant model data is called.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Using the model selection function
1
(Model No. selection)
Select the model No. by (JOG) button up, down, left, or right
operation.When the up (JOG) button is operated from the
"M1" ~ "M5" cursor position on
the top line or the down (JOG)
button is operated from the
"M16" ~ "M20" cursor posi-
tion on the bottom line, "M21"
~ "M40" is displayed. Perform the same operation to display
the model numbers "M1" ~ "M40" from "M21" ~ "M40".
2
(Model selection execution)
Press the (+) and (-) buttons
simultaneously for about 1
second. A beeping sound is
generated and the model is
selected.
- Model selection is complete when the model No. and model name at the
bottom left of the screen change.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
98
Menu screen call
by button
MENU1/2 selection
by
button
Select the function
by button
he button
When changing the receiver type and servo response to a dif-
Press t ferent model (FASS-C1, FASST-C2, or HIGH SPEED, NORMAL)
he button
When the type was changed to a different model, signals are
output by previous model type until the transmitter power is
turned off. Use after turning the transmitter power off and on.
Select the model # by (JOG) button
Model Selection "M-SEL"
Current model # and model name
Model #.
M1~M40
Model selection button
- Select the model by (JOG) button
up, down, left, or right operation.
Model # and model name cur-
rently operating
Model # and model name to be
modified
Modified model # and model
name
Model selection set button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.