Boat Mode "Boat - FUTABA 4PK-2.4GHZ Instruction Manual

Boat Mode "BOAT"

Shutting off brake side operation
When brake side operation is unnecessary with a boat, etc., it can be shut off.
Tilt mixing
Tilt mixing uses an outboard engine and applies bidirectional mixing from rudder (steer-
ing) to channel 3 and from channel 3 to rudder so that with a boat rudder operation and
tilt mixing operation can be performed by 2 servos.
Tilt mixing can be performed by rudder operation by steering wheel and 3rd channel.
Effect of set value of other functions on tilt mixing
Steering side EPA function, STEXP function, STSPD function, or D/R function setting
also affects channel 3 side operation. However, the channel 3 servo is not reversed by
setting the steering side reverse function.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Prohibiting brake side operation
1
(Shutting down brake side operation)
Select the setting item "TRG-BRK" by (JOG) button up or
down operation. Use the (+) or (-) button to select "CUT
OFF".
"NORMAL"
"CUT OFF"
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
78
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
:Normal trigger operation
:Trigger brake side operation shut down
(Steering, Throttle, system)
button
* b l i n k s a t t h e c u r r e n t
setup item.
Boat Mode "BOAT"
Brake side operation shutdown function
Tilt mixing function
Setup item selection
- Select by (JOG) button up or
down operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
Brake side operation (TRG-BRK)
NORMAL, CUT OFF