Set Contents - FUTABA 4PK-2.4GHZ Instruction Manual

After opening the box, first check if the contents conform to the following. The contents
depend on the set as shown below.
Transmitter
Receiver
Miscellaneous
- If any of the set contents are missing, or you have any questions, please contact
your dealer.
Caution
When using the T4PK in the high speed (HIGH SPEED) mode, always use it under the following
conditions:
Under other conditions, the set will not operate, or the specified performance will not be displayed even if it operates.
In addition, it may cause servo trouble. Futaba will not be responsible for damage, etc. caused by combination with the
products of other companies.
In addition, the FSU1 Fail Safe Unit cannot be used because the system is different. Use the fail safe function of the
transmitter.
When using analog servos, always switch the T4PK servo response to the NORMAL mode.
The set cannot operate in the HIGH SPEED mode. Operation in this mode will cause trouble of servo and other equipments.
Digital servos (including BLS Series brushless servos) can also be used in the NORMAL mode.
Always use only genuine Futaba transmitters, receivers, servos, ESCs (electronic speed con-
trols), Ni-MH(Ni-Cd) batteries and other optional accessories.
Futaba will not be responsible for problems caused by the use of other than Futaba genuine parts. Use the parts speci-
fied in the instruction manual and catalog.
14

Set Contents

Transmitter Ni-MH battery pack HT5F1700B
Wheel offset adapter(APA)
Servos :6V Futaba digital servo (including BLS Series brushless servos)
Receiver's battery :6V Ni-Cd battery
Transmitter mode :HIGH SPEED mode (See p.46 for setting method.)
Transmitter mode :NORMAL mode (See p.46 for setting method.)
Receiver's battery :6V Ni-Cd battery
T4PK
R604FS
*Installed in transmitter.
Receiver switch
Hook
Instruction manual