FUTABA 4PK-2.4GHZ Instruction Manual page 91

Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Operation display
While the TIMER function is operating,
menu screen.
Racing timer type selection
(Preparation)
Assign the "LAP START" switch using the function select
switch (p.86). When resetting by switch, assign "LAP RESET"
also.
1
(Racing timer type selection)
Select the setting item "TYPE" by (JOG) button up, down,
left, or right operation. Press the (+) or (-) button and set the
racing timer type.
Timer selection (TYPE)
UP TIMER : Up timer
DOWN TIMER
LAP MEMORY
LAP NAVIGATE
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
92
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t he button
Time display
: Down timer
: Lap timer
: Navigate timer
button
* blinks at the current setup item.
* b l i n k s a t t h e c u r r e n t
setup item.
Minute display (m)
Second display (s)
1/100 second display
is displayed on the initial screen and
T I M
Timer Function "TIMER"
button
Timer selection
First, select the type of
timer at the "TYPE" item.
The setup screen varies
depending on the type of
timer. This figure shows the
UP TIMER setup screen.
Setup item selection
- Select by (JOG) button up,
down, left or right operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.