FUTABA 4PK-2.4GHZ Instruction Manual page 57

Adjustment method for EXP curve
(Preparation)
- With the jog dial, move the blinking cursor up or down to select "FWD-
TYP".
With the plus (+) or minus (-) buttons, select EXP.
- With the jog dial, move the blinking cursor up or down to select "RATE"
and make the following preferred settings.
Setup items
RATE
FWD-TYP :Forward side curve
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up or down operation.
1
Forward Exponential Adjustment
Use the plus (+) button to adjust
for a faster throttle response or use
the minus (-) button for a slower or
milder throttle response.
- Plus (+) button- the higher the
number goes on the positive side,
the faster the response will be at
center of throttle response.
- Minus (-) button- the higher the
number goes on the negative side,
the milder or softer it is in the cen-
ter of the throttle response.
2
Brake Exponential Adjustment
With the jog dial, move the blinking
cursor up or down to select "BRK-
EXP".
Use the plus (+) button to adjust
for a faster brake response or use
the minus (-) button for a slower or
milder brake response.
- Plus (+) button- the higher the
number goes on the positive side,
the faster the response will be at
center of brake response.
- Minus (-) button- the higher the number goes on the negative side, the
milder or softer it is in the center of the brake response.
3
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button once).
58
:Forward side rate
selection
Throttle EXP "THEXP"
Quick
Mild
Trigger operation
Quick
Mild
Trigger operation
Curve type Select button
- Select with the (+) or (-) but-
tons.
Adjustment range
RATE :-100 ~ 0 ~ +100%
FWD-TYP :EXP, VTR, CRV
BRK-EXP :-100 ~ 0 ~ +100%
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.