Throttle Curve Adjustment - FUTABA 4PK-2.4GHZ Instruction Manual

Adjustment method for VTR curve
(Preparation)
- Select "CRV" at setup item "FWD-TYP".
Setup items
1:~5
C:RES
FWD-TYP :Forward side curve
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up, down, left or right operation.
1
Curve setup
- Select the setting item "1:" (1st point), by (JOG) button up,
down, left, or right operation, and use the (+) and (-) buttons
to set the 1st point.
Set the throttle curve by sequentially setting "2:" (2nd point)
~ "5:" (5th point).
2
Brake side adjustment
Select the setting item "BRAKE" by (JOG) button up or down
operation. When you want to quicken the rise, use the (+)
button to adjust the + side and when you want to make the
rise milder, use the (-) button to adjust the - side.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Initial value
P1:17%
P2:33%
P3:50%
P4:67%
P5:83%
60
:Curve points 1~5
:Curve reset
selection
Throttle curve
Throttle EXP "THEXP"
Curve type Select button
- Select with the (+) or (-) but-
tons.
Point in current setup
A ve r t i c a l c u r s o r l i n e t h a t
shows the point in the current
setup is displayed on the setup
screen graph.
Adjustment range
1: ~ 5 : 0 ~ 100%
F-TYP : EXP, VTR, CRV
BRAKE : -100 ~ 0 ~ +100%
Adjust buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value:
Point.1:17, 2:33, 3:50, 4:67, 5:83
BRK-EXP "0"
Returning entire curve to initial value
- Select setup item "C:RES" and
return the set value of each
point to the initial value by si-
multaneously pressing (approx.
1 sec) the (+) and (-) buttons.
For the CRV curve, only the
high side can be set. The
b r a ke b e c o m e s t h e E X P
curve.
Example
P1:8%
P2:20%
P3:35%
P4:35%
P5:50%