FUTABA 4PK-2.4GHZ Instruction Manual page 74

Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t he
DIRECT SEL
Press the button set
at this function.
CH3 active only
From ABS-DLY of MENU-3
From STM-LFT of MENU-2
(Steering left/rjght)
From ABS-MODE of MENU-3
From BRK-MODE of MENU-1
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
BRK-MODE :"ACT"
CH4 active only
MENU-1
From BRK-DLY of MENU-1
MENU-2
From STM-RGT of MENU-2
MENU-3
Brake Mixing "BRAKE"
button
Setup item
BRAKE MODE
BRK-BKRT
B34-RATE
BRK-EXP
BRK-DLY
STM-LFT
STM-RGT
ABS-MODE
ABS-ABP
ABS-DLY
* When set to BRK-MODE "ACT"
the brake mixing function is ex-
ecuted and the screen display
shown below appears.
The screen which is displayed
is different when CH3 and CH4
are independently ACT and
when both CH3 and CH4 are
both ACT.
CH3/CH4 both active
: Function ON/OFF
(CH3/4 can be independently set)
: 3rd channel brake rate
(CH3/4 can be independently set)
: 3rd channel brake rate
(CH3/4 common setting)
: Brake EXP
(CH3/4 can be independently set)
: Delay amount
(CH3/4 can be independently set)
: Steering mixing left
(CH3/4 can be independently set)
: Steering mixing right
(CH3/4 can be independently set)
: ABS. function ON/OFF
(CH3/4 can be independently set)
: ABS. brake return amount
(CH3/4 can be independently set)
: ABS. delay amount
(CH3/4 can be independently set)
75