Table of Contents
Advertisement
Bartacks
A bartack is a reinforced stitch used on garment
areas that receive extra stress like pockets, belt
loops and zippers.
Select 078. The LCD screen will briefly show a
message.
Automatic Bartack
Place the fabric under presser foot. Lower presser
foot. Sew until the machine automatically stops. A 1.5
cm (5/8˝) bartack is sewn.
Press the "Stitch Width/Needle Position" or "Stitch
Length" key to adjust bartack.
Setting Memory Bartack Size
It is possible to sew a bartack length shorter than
1.5 cm (5/8˝).
Place the fabric under presser foot. Lower presser
foot. Sew until the desired bartack length is sewn.
Stop and press the "Reverse" key. Sew until the
machine automatically stops.
To sew another bartack the same size - raise foot,
move fabric, lower foot and sew.
Reset Bartack Size
To sew a bartack a different size (or width/length
adjusted), reset the machine by pressing "ENTER" key
or reselect 078. Sew new bartack size using same
method.
Fine Adjustment Screw - Very heavy fabrics may
require the use of the fine adjustment screw. See
page 19.
55
Hide quick links:
Advertisement
Table of Contents
