ELNA 7200 Instruction Manual page 36

Close zipper. Turn zipper face up (right seam
allowance forms a small fold at basting line) and
smooth zipper teeth away from seam. Attach foot
with right side pin. Reset straight stitch length to
2.5. Starting at the bottom, sew through the folded
seam allowance and zipper tape.
Stop just before the zipper foot reaches the slider
on the zipper tape. Lower the needle slightly into
the fabric. Raise the zipper foot and open the
zipper. Lower the foot and stitch the remainder of
the seam.
Close the zipper and spread the fabric flat with the
right side facing up. Baste through the opened
seam allowance and zipper tape.
Move the zipper foot to the left side pin. Guide the
edge of foot along the zipper teeth and stitch
through the garment and zipper tape. Stop about 5
cm (2˝) from the top of the zipper. Slightly lower
the needle into the fabric. Raise the foot, remove
the basting stitches from seam line and open the
zipper.
Lower the foot and stitch the remainder of the
seam, making sure the fold is even.
Remove remaining basting stitches.
35