Winding A Bobbin - ELNA 7200 Instruction Manual

e
u
t
y
q
w
r
y
i o

Winding a Bobbin

To remove bobbin, slide bobbin cover plate release
button q to the right and lift away the bobbin cover
plate w.
Lift out the bobbin e.
Turn ON the power switch.
CAUTION: Avoid using a bobbin if it is almost
empty, as thread may tangle.
Always use bobbin type supplied with machine.
Pull up the retractable thread guide r.
Place the spool of thread t on the right side spool
pin y with the thread coming off the spool as
shown. Attach the spool holder u and press it
firmly against the spool of thread.
NOTE: Spool holder needs to be changed according
to the type of thread spool
i Large spool
o Small spool
22