ELNA 7200 Instruction Manual page 44

q
w
q w
Mark the buttonhole area on the fabric. Place both
threads to the left under the foot. Insert the
garment under the foot and hand turn the flywheel to
lower the needle at the starting point. Lower the
buttonhole foot.
Memory Auto Thread Cut Key
It is possible to program the machine to
automatically cut the threads when a buttonhole is
completed. To program - press the "Memory Auto
Thread Cut" key q after selecting the buttonhole
and before sewing begins; the LED light w will turn
on.
Begin sewing. If the buttonhole lever is not lowered,
the machine will stop and show a warning in the
LCD screen. Pull down the buttonhole lever and
sew.
While sewing a buttonhole, the LCD screen shows
e
which portion is currently being sewn.
0 Classic Buttonhole (Sensor)
The buttonhole will automatically sew:
q the front bartack, zigzag backwards on left side
and straight stitch forward on right side to front
bartack
w zigzag backwards on right side
e back bartack and stop
Variation – Reinforced Buttonhole
Suitable for heavyweight fabric. When Classic
Buttonhole sewing is complete, do not lift up
presser foot. Simply begin sewing again and sew
over first buttonhole.
43