ELNA 7200 Instruction Manual page 14

16. Review Memory Right Key
Use this key to review stitches in a memorized sequence when all stitches do
not appear on the screen.
OR
Press this key to move the cursor right until it is under the stitch that will be
edited.
17. Memory Auto Thread Cut Key
Press this key after selecting a stitch and when the Auto-Lock key is pressed
the machine will automatically cut threads after lockstitching is completed.
Press this key after the last stitch in a sequence and when the sequence
finishes sewing, the machine will automatically cut the threads.
NOTE:After this key is pressed, the Auto Thread Cut Key LED signal turns on.
q
w e r
a.
b.
c.
d.
e.
18. Stitch Selection Keys
19. Symbols in the LCD Screen
y
u
i
t
Other symbols that can appear:
13
You can select a stitch in the Direct Select Mode
by pressing the key that is illustrated with the
desired stitch.
To select stitches in the 3 Digit Mode, simply
press the three digits for the desired stitch. To
cancel the stitch you selected, press the "C" key or
select a different stitch.
q Selected stitch. (The number 1 to the right of
the stitch illustration means only one stitch will
be sewn if used in a sequence.)
w Recommended range for setting needle thread
tension dial.
e Elna recommends using this presser foot for
best sewing results.
r Stitch width or needle position – computer
automatically sets width or needle position after
a stitch is selected.
t Stitch length – computer automatically sets
length after a stitch is selected.
y Quick Resumption Mode. Switch off the
machine. The last stitch(es) that were sewn will
appear when machine is switched on.
See page 14.
u Twin or single needle. See page 11.
i Sound Mode. Machine beeps after touching
any key. See page 14.
a. My Personal Settings are applied to this
stitch.
b. Face to Face is active for this stitch.
c. Mirror Image is active for this stitch.
d. Face to Face and Mirror Image are active
for this stitch.
e. Elongation is available for this stitch.