ELNA 7200 Instruction Manual page 13

8. Memory Save/Recall Key
The 3 Digit Mode has four separate memories for saving a sequence of
stitches. Press this key to activate memory 1 (M1). Press key again to
activate M2. Continue to press this key to access M3, M4 or to exit memory.
Once a memory is activated, press the "ENTER" key to save the sequence.
To recall a saved memory, press "M" key until desired memory appears.
To activate the saved sequence, press "Mirror Image" key.
9. Enter Key
Press this key after selecting a stitch in the 3 Digit Mode and that stitch will
be memorized. Up to 50 stitches can be combined together.
These stitches cannot be memorized into a sequence: 010, 011, 071 – 076,
078 and 079.
10. Memory Auto-Lock Key
After combining a sequence of stitches in the 3 Digit Mode with the ENTER
key, press this key. Begin sewing; at the end of the sequence the machine
will automatically lock the last stitch and stop.
• symbol will appear in LCD screen.
11. Face to Face Key
When this key is pressed after selecting a stitch, the stitch will be flipped
vertically (as it appears on the stitch chart) and a symbol will appear in the
LCD screen.
Stitches that are compatible with this key are identified on the stitch chart
with an "F" directly following the stitch number.
12. Mirror Image Key
When this key is pressed after selecting a stitch, the stitch will be flipped
horizontally (as it appears on the stitch chart) and a symbol will appear in
the LCD screen.
If you have activated the permanent memories (M1, M2, M3, M4), press
this key to recall the saved sequence.
13. My Personal Setting Key
Select a stitch in Direct Select Mode or 3 Digit Mode and override the
factory settings by changing width/needle position, length, face to face,
mirror image or elongation. Press this key after changing settings. Press
"ENTER" key. New settings will now be saved as the default settings with
PS symbol in LCD screen.
14. Clear Key
When this key is pressed, the last memorized stitch or the stitch that is
above the cursor will be cleared. Press and hold the "C" key; the entire
sequence is cleared. If this key is pressed after sewing a sequence, the
sequence will be deleted.
15. Review Memory Left Key
Use this key to review stitches in a memorized sequence when all stitches
do not appear on the screen.
OR
Press this key to move the cursor left until it is under the stitch that will be
edited.
12