Wacom CINTIQ 21UX Installation Manual page 61

6. Taking care not to dislodge the bearing stopper from the hub section, position the two halves of the
bearing hub together around the pen display tablet cable and over their attachment points.
7. Attach the bearing hub sections to the unit making sure to use the correct screws for reattachment.
(The bearing hub screws are longer than the cable cover plate screws.)
Proper positioning shows the hub sections
aligned along the horizontal axis of the pen
display tablet.
The section containing the bearing stopper
should be positioned toward the top of the pen
display tablet.
Appendix
Page 59