Wacom CINTIQ 21UX Installation Manual page 38

The basic process for working with the OSD is as follows:
•
Press the M button to
ENU
open the OSD main menu.
•
Press the up or down
buttons to toggle between
the main menu icons.
Then press the S
ELECT
button to choose the
highlighted icon.
•
Press the up or down
buttons to toggle between
menu options. Press the
S button to choose
ELECT
the highlighted option.
Note that some options,
such as P , are not
OSITION
available when in DVI
mode.
•
Press the up or down buttons to select a setting for
adjustment. Press the S
the highlighted setting.
Note that some settings may not be available when
in DVI mode.
•
Use the up or down buttons to increase or
decrease the setting value.
•
Press the E button to accept your changes.
NTER
Note: After changing a setting, the OSD menu will
automatically close after a few moments of inactivity.
You can also continue to press
out of the OSD menu. All settings are automatically
saved when the OSD menu closes. If you make
changes to the display appearance and cannot return to
the original settings, go to the R
the F R
ACTORY ESET
factory defaults.
See the following pages for details about the OSD
menu options.
Customizing
Page 36
button to choose
ELECT
E
in order to back
NTER
menu and select
ESET
option to return Cintiq to its original
The Main Control icon displays a DVI or VGA identifier,
depending on which video interface is currently in use.