Wacom CINTIQ 21UX Installation Manual page 39

When you open the On Screen Display, the main menu icons are displayed.
Main Control.
Provides options (D
ISPLAY
I , P , and
MAGE OSITION
C ) that enable you to
OLOR
fine tune your display
settings. See below for
details.
,
OSD Control.
Provides options that enable
you to customize the OSD
menu. See next page.
D
ISPLAY
•
•
•
I
MAGE
•
•
•
•
Language.
Allows you to choose the language in which the
OSD menu will be displayed.
menu options are as follows:
B . Increases or decreases the image brightness.
RIGHTNESS
C . Increases or decreases image contrast.
ONTRAST
Note that changes in contrast may affect color accuracy.
B . Increases or decreases the backlight brightness
ACKLIGHT
level.
menu options are as follows:
S . Enables you to choose how the image is displayed
CALING
when working at resolutions below 1600 x 1200.
1:1 displays the image at the actual resolution. F
the image to fill the whole screen. A
image to fill as much of the screen as possible while
maintaining the correct aspect ratio.
A A . (VGA only.) Choose this function to
UTO DJUST
automatically optimize the display screen image.
P . (VGA only.) Synchronizes the signal timing of the
HASE
pen display to that of your graphics card. Use this
adjustment when you experience an unstable or flickering
image, or horizontal distortion lines.
C . (VGA only.) Changes the display data frequency to
LOCK
match that of your graphics card. Use this adjustment when
you experience an unstable or flickering image, or vertical
distortion lines.
Reset.
Returns the display
parameters of the current
mode to their factory default
settings.
resizes
ULL
resizes the
SPECT
Customizing
Page 37