Multi-Ssid - D-Link DAP-3410 User Manual

Section 3 - Configuration
The device supports up to four multiple Service Set Identifiers.
In the Basic > Wireless section, you can set the Primary SSID.
The SSID's factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to establish
a new wireless network.
Network Service Set Identifier (SSID) is the name
Name(SSID): designated for a specific wireless local area
network (WLAN).
SSID Visibility: Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Client Isolation: If this option is enabled, the connected clients
will not be able to view or access each other.
Connection This option allows for load balancing on the
Limit: AP. It sets a limit on the number of connections
that can be used across all of the broadcasted
SSIDs.
User Limit: If Connection.Limit is enabled, this option will allow you to input the maximum number of connected clients.
Authentication: The Multi-SSID security can be Open.System, WPA-Personal, WPA-Enterprise,.or.802.1x.
For a detailed description of the Open System parameters, please go to page 18.
For a detailed description of the WPA-Personal parameters, please go to page 19.
For a detailed description of the WPA-Enterprise parameters, please go to page 20.
For a detailed description of the 802.1x parameters, please go to page 21.
D-Link DAP-3410 User Manual

Multi-SSID

27