Multi-Ssid - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual
The device supports up to four multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID's factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID: Check to enable support for multiple SSIDs.
Select 2.4GHz or 5GHz.
Band:
Index: You can select up to seven multi-SSIDs. With the Primary
SSID, you have a total of eight multi-SSIDs.
SSID: Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID's
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Security: The Multi-SSID security can be Open System, WPA-
Personal, or WPA-Enterprise. For a detailed description
of the Open System parameters, please go to page 20. For
a detailed description of the WPA-Personal parameters
please go to page 21. For a detailed description of the
WPA-Enterprise parameters please go to page 22.
Priority: Select the priority level of the SSID selected.
WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature
Multimedia): will improve the user experience for audio and video
applications over a Wi-Fi network.

Multi-SSID

30