Installation Of The Solar Station - Haier HR-SC Operating Instructions Manual

Installation introduction

Installation of the solar station

1
Before installation, determine the specific installation position according to the
requirements of user.
2
According to the positions and distance of the hanger holes on the back of solar station, drill
two holes in the wall with percussion drill. The hole is 70mm in depth and 9mm in diameter.
Then fix the hanger on the wall with two expansion bolts.
3
Align the hanger holes on the back of solar station to the hook on the hanger and hang the
solar station on the hanger.
4
Screw off bolts on the bottom shell of solar station, open its front shell and connect it to
the heat circulation system (all the inlet and outlet vents of solar station are G1/2" female
standard thread).
Notice
Installation position on the wall of installation hanger of solar station must be fixed
properly and wall supporting load must be two times of weights of solar station.
The hanger holes on
the back of solar station
4
Haier solar station
Small expansion bolt
Hanger of
solar station