Wacom CINTIQ 15X Installation Manual And User's Manual page 16

LCD Display Cabling Diagram
Cintiq, rear view
DVI-I connector
Do not attach the
USB or serial data
cable until instructed
to do so.
CAUTION Do not use any cable that did not come with Cintiq; use of an improper cable may
damage the unit.
Make sure that you correctly set the Cintiq Digital/Analog (DVI/VGA) switch
for the video card you are using.
Do not connect or disconnect the video or power cables while Cintiq or your
computer are turned on – this can damage the LCD display or computer video card.
Do not exceed a display refresh rate of 75 Hz – this can overheat the LCD display
and cause permanent damage.
14
C
DC Input
B
Rear panel of your computer
Power Supply
Analog
Digital
Digital/Analog (DVI/VGA)
switch
DVI to DVI cable
Or...
VGA to DVI cable
Video card
DVI or VGA
D
A
To AC Outlet