Rear View - Wacom CINTIQ 15X Installation Manual And User's Manual

R E A R V I E W
CAUTION Be careful to avoid
catching your finger in
the gap of the movable
portion of the stand.
Important: Be sure to adjust the tilt angle of the stand to the low tilt
position before packaging Cintiq. If you do not close the stand, the notched
mechanism may be damaged during transportation and storage. Do not lift
the unit by the stand; this may damage the stand mechanism. When lifting
or moving Cintiq, always do so by grasping the main body casing.
Stand Adjustment Lever
Pull this lever to adjust the stand.
Release the lever to lock the stand
in place.
Next Step: Installation. See page 12
Digital/Analog (DVI/VGA) Switch
Use this switch to correctly set Cintiq for
the video connection you will be using.
Connector Panel Cover
To remove the cover, slide it
to the right.
Stand
The stand can be used to
adjust the tilt angle of the
unit from a low position
(18 from horizontal) to a
high position (73 from
horizontal).
11