Rear View - Wacom DTF-720 Installation Manual & User Manual

REAR VIEW

Kensington security slot
Allows easy attachment of a security cable.
Pen tether attachment point
If you will be using the pen tether,
connect it to the attachment point
located on the left or right side of
the unit.
Important: Always store the pen display on a stable surface or in its original packing carton
when not in use. Be sure to adjust the stand to the low tilt position before packaging the
DTF-720. If you do not close the stand, the notched mechanism may be damaged during
transportation and storage.
Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving
the DTF-720, always do so by grasping the main body casing.
Pen storage compartment
C
AUTION
Be careful to avoid catching your
finger in the gap of the movable
portion of the stand.
Stand adjustment lever
Pull this lever to adjust the
stand. Release the lever
to lock the stand in place.
Video, USB, and power
connectors
Stand
The stand can be used
to adjust the tilt angle of
the unit.
Your new DTF-720
Page 9