Bus Options; Device Options - HP Point of Sale rp5000 Manual

Computer Setup (Continued)
Heading
Advanced*
(continued)
*These options should be used by advanced
users only.
✎
Support for specific Computer Setup options may vary depending on your hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Bus Options

Device Options

www.hp.com
Computer Setup (F10) Utility Guide
Description
On some models, allows you to enable or
disable:
• PCI bus mastering, which allows a PCI
device to take control of the PCI bus.
• PCI SERR# generation.
• PCI VGA palette snooping, which sets
the VGA palette snooping bit in PCI
configuration space; only needed when
more than one graphics controller is
installed.
Allows you to set:
• Printer mode (bi-directional, EPP & ECP,
output only).
• Num Lock state at power-on (off/on).
• PME (power management event) wakeup
events (enable/disable).
• Processor cache (enable/disable).
• Hyper-threading (enable/disable).
• ACPI S3 support (enable/disable). S3 is
an ACPI (advanced configuration and
power interface) sleep state that some
add-in hardware options may not
support. This feature is supported on some
models only.
• ACPI S3 Video REPOST (enable/disable).
This feature reruns the video option ROM
on a boot from the S3 state.
15