Computer Setup (Continued)
Heading
Advanced*
(continued)
*These options should be used by advanced
users only.
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup (F10) Utility Guide
Option
Bus Options
Device Options
www.hp.com
Computer Setup (F10) Utility Guide
Description
On select models, allows you to enable or
disable:
• PCI bus mastering, which allows a PCI
device to take control of the PCI bus.
• PCI SERR# generation.
• PCI VGA palette snooping, which sets
the VGA palette snooping bit in PCI
configuration space; only needed when
more than one graphics controller is
installed.
Allows you to set:
• Printer mode (bi-directional, EPP & ECP,
output only).
• Num Lock state at power-on (off/on).
• PME (power management event) wakeup
events (enable/disable).
• Processor cache (enable/disable).
• ACPI S3 support (enable/disable). S3 is
an ACPI (advanced configuration and
power interface) sleep state that some
add-in hardware options may not support.
This feature is supported on select models
only.
• ACPI S3 Video REPOST (enable/disable).
This feature reruns the video option ROM
on a boot from the S3 state.
17