HP Point of Sale rp5000 Manual page 10

Computer Setup (F10) Utility Guide
Computer Setup (Continued)
Heading
Storage
(continued)
✎
Support for specific Computer Setup options may vary depending on your hardware
configuration.
6
Option
Device Configuration
(continued)
www.hp.com
Description
IDE Devices (continued)
Drive Type Emulation Options
CD-ROM No emulation options
available.
Transfer Mode (IDE devices only)
Specifies the active data transfer mode.
Options (subject to device capabilities)
are PIO 0, Max PIO, Enhanced DMA,
Ultra DMA 0, and Max UDMA.
Translation Mode (IDE disks only)
Lets you select the translation mode to be
used for the device. This enables the BIOS
to access disks partitioned and formatted
on other systems and may be necessary
for users of older versions of UNIX
(e.g., SCO UNIX version 3.2). Options are
Bit-Shift, LBA Assisted, User, and None.
Ä
CAUTION: Ordinarily, the translation
mode selected automatically by the BIOS
should not be changed. If the selected
translation mode is not compatible with
the translation mode that was active when
the disk was partitioned and formatted,
the data on the disk will be inaccessible.
Computer Setup (F10) Utility Guide