Download Print this page

Controller Order; Security; Setup Password; Power-On Password - HP Point of Sale rp5000 Manual

Computer setup (f10) utility guide
Hide thumbs

Advertisement

Computer Setup (Continued)
Heading
Storage
(continued)

Security

Support for specific Computer Setup options may vary depending on your hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Controller Order

(This feature is
supported on some
models only.)

Setup Password

Power-On Password

Password Options

(This selection will
appear only if a
power-on password
is set.)
www.hp.com
Computer Setup (F10) Utility Guide
Description
Allows you to specify the order of attached
hard drive controllers. The first hard drive
controller in the order will have priority in the
boot sequence and will be recognized as
drive C (if any devices are attached).
This selection will not appear if all of the
hard drives are attached to the embedded
IDE controllers.
Allows you to set and enable setup
(administrator) password.
If the setup password is set, it is required
to change Computer Setup options, flash
the ROM, and make changes to certain
plug and play settings under Windows.
Also, this password must be set in
order to use some HP remote security
tools.
See the Troubleshooting Guide on the
Documentation CD for more information.
Allows you to set and enable power-on
password.
See the Troubleshooting Guide on the
Documentation CD for more information.
Allows you to:
• Enable/disable network server mode.
• Specify whether the password is required
for warm boot (CTRL+ALT+DEL).
This selection is available only when
Network Server Mode is disabled.
See the Desktop Management Guide on the
Documentation CD for more information.
9

Advertisement

loading

  Related Manuals for HP Point of Sale rp5000