Installing An Expansion Card - HP Point of Sale rp5000 Hardware Reference Manual

Hardware Upgrades

Installing an Expansion Card

2-10
The computer has two PCI expansion slots. Each slot can
accommodate an expansion card up to 6.875 inches (17.46 cm)
in length. To install an expansion card:
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and disconnect
any external devices.
3. Remove the computer access panel (see
Computer Access Panel and Front Bezel"
4. Remove the expansion card cage and identify the slot into which
you want to insert the expansion card (see
Expansion Card Cage"
5. Release the slot cover retention latch 1 that secures the PCI slot
covers by rotating the latch outward.
6. Remove the slot cover by sliding it out 2.
Removing the Expansion Slot Cover
www.hp.com
"Removing the
in this chapter).
"Removing the
in this chapter).
Hardware Reference Guide