HP Point of Sale rp5000 Hardware Reference Manual page 27

✎
Ä
Hardware Reference Guide
7. Push the drive release latch 1 toward the rear of the chassis
and hold.
8. Slide the drive 2 toward the front of the drive cage, then lift the
drive out of the computer.
Removing the Optical Drive or Diskette Drive
To replace the drive, reverse the removal procedures.
When replacing the drive, transfer the four screws from the old drive
to the new one. The screws take the place of drive rails.
CAUTION: If you do not replace the optical drive, you must install a
5.25-inch bezel blank for proper air circulation to cool internal
components during operation. Contact an authorized HP reseller or
service provider to order the appropriate bezel when reconfiguring the
computer.
www.hp.com
Hardware Upgrades
2-17