HP Point of Sale rp5000 Hardware Reference Manual page 35

Installing a Drive into the 3.5-inch Drive Bay
Ä
Hardware Reference Guide
Depending on the computer configuration, the 3.5-inch drive bay on
the left side of the computer may be configured with a diskette drive
or it may be an empty drive bay. The type of bezel covering the
drive bay will vary depending on the original computer configuration.
If the computer was not configured with the optional diskette drive,
you can install a 3.5-inch device, such as a diskette drive or hard
drive, into the drive bay at any time.
CAUTION: For proper air circulation to cool internal components during
operation, you must install a 3.5-inch bezel. The type of bezel you need
will depend on the type of device you plan to install. If you are installing
a diskette drive, you must install a diskette drive bezel. If you are
installing a hard drive, you must install a bezel blank. If you are installing
a 3.5-inch device other than a diskette drive or hard drive, you must
install the 3.5-inch device bezel. Contact an authorized HP reseller or
service provider to order the appropriate bezel when reconfiguring the
computer.
www.hp.com
Hardware Upgrades
2-25