HP Point of Sale rp5000 Hardware Reference Manual page 36

Hardware Upgrades
✎
2-26
The guide screws on a 3.5-inch diskette drive 1 are placed closer
together than on the hard drive 2.
Guide Screw Locations
To install a drive into the bay:
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and disconnect
any external devices.
3. Remove the computer access panel and front bezel (see
"Removing the Computer Access Panel and Front Bezel"
chapter).
www.hp.com
in this
Hardware Reference Guide