HP Point of Sale rp5000 Hardware Reference Manual page 39

Point of sale system
Hide thumbs Also See for Point of Sale rp5000:
Table of Contents

Advertisement

Ä
Hardware Reference Guide
6. Replace with the appropriate bezel by pushing the bezel into
place.
CAUTION: For proper air circulation to cool internal components during
operation, you must install a 3.5-inch bezel. The type of bezel you need
will depend on the type of device you are installing. If you are installing a
diskette drive, you must install a diskette drive bezel. If you are installing
a hard drive, you must install a bezel blank as shown in the illustration
below. If you are installing a 3.5-inch device other than a diskette drive
or hard drive, you must install the 3.5-inch device bezel. Contact an
authorized HP reseller or service provider to order the appropriate bezel
when reconfiguring the computer.
Replacing the 3.5-inch Bezel
7. Connect the power and data cables.
8. Replace the front bezel and computer access panel.
If you have installed a hard drive that is not automatically recognized
by the computer, see
Guidelines."
www.hp.com
Appendix C, "Hard Drive Installation
Hardware Upgrades
2-29

Advertisement

Table of Contents
loading

Table of Contents