HP Point of Sale rp5000 Hardware Reference Manual page 32

Hardware Upgrades
Ä
2-22
7. Raise the Easy Access drive bay to the upright position and
connect the flat ribbon cable and audio cable to the system board.
8. Connect the power cable and flat ribbon cable to the rear of the
optical drive.
Connecting the Power and Flat Ribbon Cable
9. Return the Easy Access drive bay to the down position. Be sure
not to pinch the cables in the chassis when lowering the Easy
Access drive bay.
10. Replace the front bezel and computer access panel.
The system automatically recognizes the drive and reconfigures the
computer.
CAUTION: When servicing the computer, ensure that cables are placed
in their proper locations during the reassembly process. Improper cable
placement can damage the computer.
www.hp.com Hardware Reference Guide