HP Point of Sale rp5000 Hardware Reference Manual page 16

Hardware Upgrades
Ä
Ä
Å
2-6
CAUTION: When handling a memory module, be careful not to touch
any of the contacts. Doing so may damage the module.
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and disconnect
any external devices.
3. Remove the computer access panel and front bezel (see
"Removing the Computer Access Panel and Front Bezel"
chapter).
CAUTION: Check the position of all cables and wires before raising or
lowering the Easy Access drive bay to prevent damage.
4. Rotate the Easy Access drive bay to an upright position.
Rotating the Easy Access Drive Bay
5. Locate the memory module sockets.
WARNING: To reduce risk of personal injury from hot surfaces, allow
the internal system components to cool before touching.
www.hp.com
in this
Hardware Reference Guide