An Example Of Voice Operation; Search For Poi In Vicinity - Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual

Chapter
18 Operating Your Navigation System with Voice
An Example of Voice
Operation

Search for POI in vicinity

In this example, you want to search for the
nearest gas station and set it as your destina-
tion.
p Give the following verbal commands after
switching to the navigation screen.
= For details, refer to Voice commands related
to navigation on page 161
1 Press MAP button to display the navi-
gation map screen.
2 Touch VOICE icon.
A list of commands for voice operation ap-
pears. After the message, the beep indicates
that the system is ready to accept your voice
command. Say a command after this beep.
Say "Destination".
3
A message to prompt the next operation is
given.
p If you say "Back" or touch [Back], the
screen returns to the previous screen.
Say "Vicinity Search".
4
Say the corresponding commands for the
function you want to operate. Here, the selec-
tion method of your destination is specified.
158
En
When you want to search the gas station near-
est to the current location, say "Vicinity
Search".
The message "Vicinity search. Please re-
quest POI category." appears, and the naviga-
tion system pronounces that message.
Say "GAS Station".
5
The message "Vicinity search. Gas Station"
appears.
The map of the nearest gas station is shown.
p For categories that can be used as the voice
commands, refer to "Category list for vicinity
search".
= For details, refer to Category list for vicinity
search on page 172
6 Touch VOICE icon.
Say "Next" or "Previous" to select the
7
desired facilities.
After confirming the location, say "Set
8
As Destination".
If there is no route, the system starts the route
calculation. If the route is already set, touch
VOICE icon to start route calculation.