Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual page 182

Appendix
Appendix
Registration failed.
Automatic connection in pro-
gress. Please try again later.
Automatic connection in pro-
gress. Please try manually
later.
Could not find any available
phone.
Bluetooth unit error. It is not
possible to find any cell
phones.
Bluetooth unit error. The de-
vice name could not be set.
Registration is not available.
Reading failed.
Calibration failed. Please refer
to the owner's manual.
The HDD is not connected.
Cannot use HDD.
182
En
The cellular phone's Bluetooth wire-
less technology is turned off during
the registration step.
Rejection by the cellular phone has
received.
Registration step has failed for
some reason.
If you try to perform another opera-
tion during automatic connection
by the system.
If you try to connect another phone
during automatic connection by the
system.
No available phone exists in the sur-
roundings when the system
searches for the cellular phone fea-
turing Bluetooth wireless technol-
ogy for registration.
If the Bluetooth unit (sold sepa-
rately) is disconnected from this na-
vigation system or Bluetooth unit
carries out another processing
when the system search the cellular
phone featuring Bluetooth wireless
technology for registration.
If the Bluetooth unit (sold sepa-
rately) is disconnected from this na-
vigation system or the Bluetooth
unit carries out another process
when you change the device name.
If you try to perform another opera-
tion immediately after connection
failure.
If you transferred the data from your
cellular phone in a format can not
be received with navigation system.
Disconnection has been made dur-
ing transfer for some reason.
The touch panel calibration has not
been carried out with appropriate
steps.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Keep turning the target phone's Bluetooth
wireless technology on during the registra-
tion.
Operate the target phone and accept the re-
gistration request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
Retry the registration and if the registration
still fails, try registering using your cellular
phone.
! Wait for a while and retry.
! Establish that connection temporarily and
retry that later.
Establish that connection temporarily and
retry it later.
! Turn the target phone's Bluetooth wireless
technology on.
! Check whether your cellular phone is
turned off and, whether the distance to your
cellular phone is too far.
! Check the connection and retry.
! Establish that connection temporarily and
retry later.
! Check the connection and retry.
! Establish that connection temporarily and
retry later.
Wait for a while and retry.
Select just a suitable item, format, and then
retry.
Connect your cellular phone again and retry.
Please read the instruction of touch panel ca-
libration and retry. (Page 190)
Consult your dealer.
Consult your dealer.