Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual page 31

Basic Operation
p If there is no matching location, the naviga-
tion system displays "The address does
not exist. Do you want to continue ?".
When you touch [Yes], a place near the spe-
cified location appears. In this case, pay at-
tention to the displayed location may not be
suitable for your intention. If you want to try
again, touch [No] to return to the previous
screen.
p If you did not input the house number in
Step 5, the house number input screen ap-
pear after this step. You should input the
house number now (perform Step 5).
Route calculation starts.
When the route calculation is completed,
"Route confirmation screen" appears.
# Operation of street list screen
2
1 Number of possible choices
2
:
3 4 1
5
Touching or on the scroll bar scrolls
through the list and allows you to view the
remaining items.
3
:
If all of characters cannot be displayed with-
in the displayed area, touching
right of the item allows you to see remain-
ing characters.
4
:
Touching displays a map of the place
you have selected. (Possibilities for place
names may appear with the list screen.)
You can also set a destination by touching
to the right of the list. Touch [OK] to set
the location indicated by the scroll cursor
as your destination.
5 [Back]:
Returns previous screen.
# Checking the location on the map
Location confirmation screen
1
2
3
1 Calculating the route to the destination
Route calculation starts. When the route
calculation is completed, "Route confirma-
tion screen" appears.
p If you press MAP button or MENU but-
ton during route calculation, the calcu-
lation is canceled and the map screen
appears.
2 Scrolling the map
The map display changes to the scroll
mode. You can fine-tune the location in the
scroll mode, and then you can set the loca-
tion as your destination or do various opera-
tions by using the shortcut menu.
= For details, refer to Shortcut menu on
page 45
3 Setting the location as a waypoint
The location indicated by the scroll cursor
will be set as a waypoint.
Chapter
03
to the
31
En