Checking And Modifying The Route - Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual

Chapter
03 Basic Operation
= For details, refer to Editing Waypoints on
page 36
9 Touch [OK] to decide your route.

Checking and modifying the route

You can check the route details. You can also
recalculate the route in different conditions.
Route confirmation screen
4
5
6
7
8
9
3
1 Route calculation condition
Shows the route has been calculated under
those conditions.
shows that fastest route is prioritized.
!
shows that shortest route is priori-
!
tized.
shows that using highways and main
!
roads are prioritized.
shows whether the suggested
!
route includes freeways.
shows whether the suggested
!
route includes toll roads. The current
setting appears.
shows whether the suggested
!
route includes ferries. The current set-
ting appears.
shows whether the suggested
!
route includes learning routes. The cur-
rent setting appears.
In addition, if the calculated route has unin-
tended results, the following icons will be
shown.
32
En
2 1
shows that freeways could not be
!
avoided.
shows that toll roads could not be
!
avoided when the setting [Avoid Toll
Road] is [On].
shows that ferries could not be
!
avoided when the setting [Avoid Ferry]
is [On].
shows for routes that contain streets
!
or bridges that are subject to traffic reg-
ulations during a certain time when the
setting [Time restrictions] is [On].
2 Distance to the destination
3 Travel time to destination
4 Set the displayed route
Sets the displayed route as your route, and
starts the route guidance.
= For details, refer to When the route guidance
starts on the next page
5 Display multiple routes
You can select a desired route from multiple
route options. Calculated routes are shown in
different colors.
Touching to
Touching [OK] returns to the previous display.
If you set waypoints, you cannot use the multi-
ple route option.
p There can be cases that the same route
is displayed even when multiple routes
are searched.
p In multiple route calculations, both
routes that use and avoid the freeways
are calculated independently of the set-
ting for [Avoid Freeway].
6 Change the route calculation condition
Modify each calculation condition, and recal-
culate the route.
= For details, refer to Modifying the Route Cal-
culation Conditions on page 34
7 View the route profile
switch to another route.