When The Route Guidance Starts; Canceling The Route Guidance - Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual

Basic Operation
You can check the streets that you will travel
to reach the destination.
= For details, refer to Checking the passing
streets with a list on page 35
8 Check the shape of route
You can check the overall shape of your route
and the location of destination on the map.
= For details, refer to Checking the entire route
overview on the map on page 36
9 Adding and edit waypoint
You can add, remove, or sort waypoints.
= For details, refer to Editing Waypoints on
page 36

When the route guidance starts

Touching [OK] in "Route confirmation screen"
starts the route guidance on the displayed
route. Your navigation system gives you the fol-
lowing information with the timing adjusted to
the speed of your vehicle:
— Distance to the next turning point
— Direction of travel
— Road number of the freeway
— Arrival of waypoint (If waypoints are set)
— Arrival of your destination
p Touching
or
voice guidance on or off.
p Touching
allows you to hear the in-
formation again.
p If you stop at a gas station or a restaurant
during the route guidance, your navigation
system remembers your destination and
route information. When you start the en-
gine and get back on the road, the route
guidance resumes.
p If you deviate from the route with guidance
set to [Route View] or [Guide Mode] and
enter a street not recorded on the hard disk
drive, the screen changes to [Map Mode].
When you return to the route, the screen re-
turns to the original view and resumes
route guidance.
Basic items on the screen
This section describes only the basic items
that are displayed on the Map Mode screen.
allows you to turn the
= For more details about "Details of the map
screen", refer to How to Use the Map on page
38
2 3
1 Current location
2 Distance to the destination
3 Estimated time of arrival (default)
4 ON/OFF key for voice guidance

Canceling the Route Guidance

If you no longer need to travel to your destina-
tion or if you want to change your destination,
follow the steps below to cancel the route gui-
dance.
1 Touch [Destination] in the navigation
menu, then touch [Cancel Route].
A message confirming whether to cancel the
current route appears.
2 Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
On this screen, you can also select the follow-
ing items:
[Skip]:
Skip the route to the selected waypoint, and re-
calculate the route. (The skipped waypoint will
not be deleted.)
[No]:
Returns to the previous display without delet-
ing the route.
1 4
En
Chapter
03
33