Related Manuals for RAB Lightcloud Blue
Summary of Contents for RAB Lightcloud Blue
- Page 1 Welcome PLC Hybrid Omni PLC-9-O-HYB/LCB WE’RE HERE TO HELP: 1(844) LIGHTCLOUD 1(844) 544-4825...
-
Page 2: Product Features
Hello Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent-pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each... -
Page 3: Safety Information
Safety Information • Not suitable for use with dimmers and sensors ® unless specifically designed for RAB Lightcloud Blue lamps. • Risk of electric shock. • Do not use where directly exposed to water. • Not intended for use with emergency exit fixtures or emergency lights. -
Page 4: Turn Off Power
• Turn off the main power at the breaker panel or remove the fuse from the fuse box. Find a suitable location • Lightcloud Blue devices should be positioned within 60 ft. of each other. • Building materials such as brick, concrete and steel construction may require additional Lightcloud Blue devices to extend around an obstruction. - Page 5 (cont’d) Connect device to power For first time use, the lamp will be ready to pair to the Lightcloud Blue app. Power on the lamp to enter pairing mode. While pairing, the lamp will flash on/off 5x and then dim and flash on/off...
- Page 6 Controlling your Lightcloud Blue Device Confirm your device is powered on. Download the Lightcloud Blue app from the Apple® App Store or Google® Play store. Launch the App and create an account. Tap the "add device" icon in the app to start connecting devices.
- Page 7 Setting Device to Pairing Mode To restore your Lightcloud Blue PLCO omni Tunable tube to factory settings, use the following methods. Method 1: Delete from App Open the app and access the device settings for the paired device. Be sure that the lamp is online and select "Delete".
-
Page 8: Emergency Default
All configuration of Lightcloud Blue products may be performed using the Lightcloud Blue app. Emergency default If communication is lost, the Lightcloud Blue lamps will revert back to the last known 'On' status. This setting can be adjusted using the Lightcloud Blue mobile app. - Page 9 Such modifications could void the user’s authority to operate the equipment. CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting may void the user’s authority to operate this equipment.
- Page 10 Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s reach.
- Page 11 Safety Information “WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.” “WARNING - Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the...
- Page 12 Safety Information THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE ELECTRICAL CODES.
Need help?
Do you have a question about the Lightcloud Blue and is the answer not in the manual?
Questions and answers