Ending A Call - Cisco 7970G - IP Phone VoIP Phone Manual

If you want to...
Auto-connect calls
Retrieve a parked call on
another phone
Use your phone to answer
a call ringing elsewhere
Answer a priority call
(SCCP phones only)
Answer a call on your
mobile phone or other
remote destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using a headset
Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0
Then...
Use AutoAnswer.
Use Call Park or Directed Call Park.
Use Call Pickup.
Hang up the current call and press
Answer.
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
Your desktop and remote destinations
receive calls simultaneously.
When you answer the call on your
desktop phone, the remote destinations
stop ringing, are disconnected, and
display a missed call message.
When you answer the call on one remote
destination, the other remote
destinations stop ringing, are
disconnected, and a missed call message
is shown on the other remote
destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press
For more information, see...
Using AutoAnswer with a
Headset or Speakerphone,
page 49
Storing and Retrieving Parked
Calls, page 36
Picking Up a Redirected Call
on Your Phone, page 35
Prioritizing Critical Calls,
page 42
Managing Business Calls
Using a Single Phone Number,
page 44
. Or, to keep headset mode active, press EndCall.
21