Cisco 7970G - IP Phone VoIP Phone Manual page 61

If you want to...
Dial from a call log
(while connected to
another call)
See if the line in the
call log is busy
before placing a
call to that line
Place a call from a
URL entry in a call
log (SIP phones
only)
Tips
• (SCCP and SIP phones) Your phone might be set up for international call logging, which is
indicated by a "+" symbol on the call logs, redial, or call directory entries. See your system
administrator for more information.
• (SCCP phones only) To view the complete call record of a multiparty call (for example, of call that
has been forwarded or transferred to you), highlight the call record and press Details. The Details
record shows two entries for each missed or received multiparty call. The entries are listed in
reverse chronological order:
Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0
Then...
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record.
Note If the Details softkey appears, the call is the primary entry of a multiparty
call. See the Tips
3. If you need to edit the displayed number, press EditDial followed by << or
>>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Press Dial.
5. Choose a menu item to handle the original call:
Hold—Puts the first call on hold and dials the second.
–
Transfer—Transfers the first party to the second and drops you from
–
the call. (Press Transfer again after dialing to complete the action.)
Conference—Creates a conference call with all parties, including you.
–
(Press Confrn or Conference again after dialing to complete the
action.)
EndCall—Disconnects the first call and dials the second.
–
Look for Busy Lamp Field indicators. See
page 40.
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight the URL entry that you want to dial.
3. If you need to edit the entry, press EditDial.
4. The icon appears to indicate that you can begin editing characters in
the URL entry.
5. Press Dial.
section below.
Using BLF to Determine a Line State,
53