Advertisement
LED 3rd Brake Light Ring
For 2007 - 2018 JK & JKU Wrangler Vehicles:
PARTS LIST:
LED 3rd Brake Light Ring - QTY 1
"Y" Adapter Wiring Harness - QTY 1
with Y Adapter
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL
INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL THIS
PRODUCT. ALWAYS WEAR SAFETY GLASSES DURING INSTALL.
The Trusted Source
#
12052.0904
REQUIRED TOOLS:
Safety Glasses
Lug Wrench & Socket
T20 Torx Driver or Bit
®
Advertisement
Table of Contents
Related Manuals for Quadratec 12052.0904
Summary of Contents for Quadratec 12052.0904
- Page 1 LED 3rd Brake Light Ring with Y Adapter For 2007 - 2018 JK & JKU Wrangler Vehicles: 12052.0904 PARTS LIST: REQUIRED TOOLS: LED 3rd Brake Light Ring - QTY 1 Safety Glasses “Y” Adapter Wiring Harness - QTY 1 Lug Wrench & Socket...
- Page 2 Careful attention is required to this instruction or operation but does ® generally not relate to personal injury. Damage to your Quadratec product or other property may result if you don’t follow instructions. Before You Begin Installation: Congratulations on your purchase of to shipping.
- Page 3 Installation Instructions: Put on safety glasses. Remove the lug the spare tire. Pass the connector and nuts that secure the spare tire using lug harness from the third brake light ring wrench and correct socket (factory lug behind the spare tire carrier and out nuts use ¾”...
- Page 4 Installation Instructions: “Y” Adapter Harness Factory Harness Remove factory brake light from the Plug the supplied “Y” harness into the housing and unplug the factory connec- factory harness as shown. Make sure tor from the back of the brake light. the connectors fully engage &...
- Page 5 Installation Instructions: Reinstall the factory brake light into the Close the tailgate and reinstall the spare tire carrier housing. Be careful not to tire and secure it with the 3 lug nuts. pinch any of the wires while rein- Tighten by hand and do not use an im- stalling.
- Page 6 Quadratec to obtain a RGA number only to Quadratec branded accessories first sold (610-701-3336). All labor, removal, shipping in the United States, Quadratec warrants to the and installation costs are customer’s initial retail purchaser only that your responsibility.
Need help?
Do you have a question about the 12052.0904 and is the answer not in the manual?
Questions and answers