Advertisement
Quick Links
QuadraTop
Replacement Soft Top
Installation Manual for '07-'18 2-Door Wrangler (JK)
PARTS LIST:
FABRIC TOP - QTY 1
QUARTER WINDOW, RIGHT - QTY 1
QUARTER WINDOW, LEFT - QTY 1
REAR WINDOW - QTY 1
HEADER FOAM PACK - QTY 1
FABRIC SPRING GUARDS - QTY 2
Loss of vehicle control involves risk of death or serious injury,
particularly to parts of your body not restrained within vehicle.
This product is intended for weather protection only and should
not be relied upon to contain occupants in the event of an accident
or to protect from either ground contact or falling objects.
To reduce risk of accident or injury:
•
ALWAYS WEAR SEATBELTS
•
Always keep head, arms & body parts within vehicle.
•
Fully secure or stow the soft top before driving according
to instructions. Never try to latch or fold soft top while driving.
Do not use if damaged or worn.
•
Read and follow all instructions & warnings accompanying
this product, in your vehicle owner's manual and Off Road
Driving Supplement.
RISK OF EYE INJURY. Safety glasses should be worn at all times
while installing or maintaining this product.
REQUIRED TOOLS:
SAFETY GLASSES
MASKING TAPE
PHILLIPS SCREW DRIVER
T-15 TORX DRIVER OR BIT
PLIERS
The Trusted Source
®
Fabric
®
Advertisement
Related Manuals for Quadratec QuadraTop
Summary of Contents for Quadratec QuadraTop
- Page 1 QuadraTop ® Fabric Replacement Soft Top Installation Manual for ’07-’18 2-Door Wrangler (JK) Loss of vehicle control involves risk of death or serious injury, particularly to parts of your body not restrained within vehicle. This product is intended for weather protection only and should not be relied upon to contain occupants in the event of an accident or to protect from either ground contact or falling objects.
- Page 2 Careful attention is required to this instruction or operation but does generally not relate to personal injury. Damage to your Quadratec ® product or other property may result if you don’t follow instructions.
- Page 3 Soft Top Removal: If no previous soft top is present, skip to page 5 For a smooth fit and ease of installation, this top should be installed at temperatures above 72 degrees. Below this temperature, the fabric may contract an inch or more making it difficult to install. We highly recommend taking the top out of the package and letting it sit inside a warm place or direct sunlight for 1-2 hours before you install the top.
- Page 4 Soft Top Installation: Fig 5 Fig 6 Fig 7 Fig 8 Step 1B: Remove Existing Top Fabric Detach your old Soft Top Fabric from For Model Years 2007-2009 Only: the Header. For Model Years 2010-2018 You will need to peel back the foam Only: You will need to peel back the and remove the two corner screws corner foam and unscrew the cable...
- Page 5 Soft Top Installation: Fig 9 Fig 10 Clamp Header to Windshield Step 2: Install the New Top Fabric As seen in Fig 10, drape the soft top to the Windshield Header With the old top completely removed fabric backing side up over the hood and the top header plate unscrewed and the windshield and locate the front from the lower header, raise the bow...
- Page 6 Soft Top Installation: FIG 13 FIG 14 Fig14 Step 4: Secure Top in Lower Header Fig15 FIG 15 Working from the center out, secure the top in the lower header channel with masking tape holding it in place for installing the top plate to the lower header.
- Page 7 Installation: Note: Figs 20 & 21 bows folded back to rear of vehicle. Rear corner shown. FIG 20 FIG 21 Cable Anchor Fabric Pocket fits over Header Step 6: Header Corner Pockets Slip the corner pocket sewn into the top between the header and position the cable anchors over the two holes with the cable facing the outside of the...
- Page 8 Soft Top Installation: FIG 24 FIG 25 Fig14 Fig15 FIG 26 FIG 27 Top Bracket Cable Spring installed into Top Bracket Step 9: For JK 2-Door Vehicles Securing the Cable Spring Locate the Cable spring hanging out of crimp the spring end closed so it cannot the top behind the rear seat next to the be easily slipped off (see call out on Figs rear vertical door surrounds.
- Page 9 Soft Top Installation: Step 10: Reinstall Center Bow Screws FIG 28 Flip the rear of the top forward exposing the center Bow. Install the hook & loop Flap that attach the center bow. (Bow #1 over the sound bar). See Fig 28 FIG 29 FIG 30 Fig14...
- Page 10 Soft Top Installation: FIG 33 FIG 34 Step 13: Secure Top Front to Windshield With the cable spring installed, with FIG 35 two people (one on each side of the header) fold down the header to the windshield and close the front header latches to secure the front of the top to the windshield.
- Page 11 Soft Top Installation: FIG 38 FIG 39 Step 15: Front of Quarter Windows Attach the front of the quarter windows slot on the door surround. Repeat on the along the front edge of the vertical door opposite side of the top. surround by rolling the plastic into the See Figs 38 &...
- Page 12 Soft Top Installation: FIG 43 FIG 44 Step 17: Elastic Window Roll Straps Snap the elastic window roll straps These handy straps can be used to on the rear bow above the rear window secure your rear window when rolled opening as shown.
- Page 13 Soft Top Installation: FIG 49 FIG 50 FIG 51 FIG 52 Step 19: Secure Rear Windows Secure the rear window zippers by If the zippers have too much distance pulling the two zipper sliders all the between the window and the top, slide way down as far as possible in order to the rear corners around towards the catch the sliders on the zipper pin.
- Page 14 Care and Maintenance: Your QuadraTop is made of the finest first and test zipper. If the zipper contin- materials available but to keep it look- ues to remain open squeeze more firmly ing new and for the maximum possible with pliers and try the zipper again.
- Page 15 Flip-Back Front Open: ® Soft Top Repair Kit Replacement Hardware & Soft Top Accessories available at Quadratec.com Please review this set of instructions, > Complete Bow Assemblies: 11132.95XX and examine your original equipment > Soft Top Emergency Repair Kit: 91083.4201 hardware.
- Page 16 This Limited Warranty is the only warranty made Limited Warranty. Customers requesting warranty in connection with purchase. Quadratec neither consideration on QuadraTop soft top should first assumes nor authorizes any vendor, retailer or contact Quadratec to obtain a RGA number other person or entity to assume for it any other (610-701-3336).