Related Manuals for PureTools PT-SW-U324
Summary of Contents for PureTools PT-SW-U324
- Page 1 User Manual PT-SW-U324 User Manual 2x4 USB 3.2 Gen 1 ProAV Hub Model PT-SW-U324 Designed in Germany Version V1.0 © 2025 PureLink GmbH All rights reserved.
- Page 2 User Manual PT-SW-U324 Preface Read this user manual carefully before using this product. Pictures shown in this manual are for reference only. Different model layouts and specifications are subject to the physical product. This manual is for operation instructions only, not for any maintenance usage.
-
Page 3: Fcc Statement
User Manual PT-SW-U324 FCC Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 4 User Manual PT-SW-U324 REACH | 1907/2006/EU ROHS | 2011/65/EU PureLink hereby declares that this product PureTools PT-SW-U324 complies with Directives 1907/2006/ EU and 2011/65/EU. EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive) PureLink GmbH hereby declares that this product PureTools PT-SW-U324 complies with Directives 2014/30/EU and 2014/35/EU.
- Page 5 User Manual PT-SW-U324 SAFETY PRECAUTIONS To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. ⚫ Unpack the equipment carefully and save the original box and packing material for possible future shipment.
- Page 6 User Manual PT-SW-U324 ⚫ Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards. Install the device in a place with fine ventilation ⚫ to avoid damage caused by overheat.
-
Page 7: Table Of Contents
User Manual PT-SW-U324 Contents 1. Product Introduction ............2 1.1 Introduction ............2 1.2 Features ..............3 1.3 Package List.............4 2. Panel Description ............4 3. Specification ..............6 4. API Commands...............8 5. System Diagram ............12 6. Firmware Upgrade............13 7. After-Sales Service .............15 Asking for Assistance .............17... -
Page 8: Product Introduction
User Manual PT-SW-U324 1. Product Introduction 1.1 Introduction This is a 2/4-port USB 3.2 Gen1 peripheral sharing device that allows users to share 4 USB devices between 2 different general computers by using USB 3.2 Gen 1 Type-B to Type-A cables. It allows for a neat and tidy installation. -
Page 9: Features
User Manual PT-SW-U324 1.2 Features ⚫ Enables 2 computers to share 4 USB 3.2 Gen1 devices ⚫ USB 3.2 Gen1 compliant, supporting data transfer rates of up to 5Gbps ⚫ LED indicates which computer is active ⚫ Over-current protection ⚫... -
Page 10: Package List
User Manual PT-SW-U324 1.3 Package List ⚫ 1× 2x4 USB 3.2 Gen 1 Switcher ⚫ 1× 12V/3A Power Supply with EU Conversion Plug ⚫ 2× Mounting Ear ⚫ 4× Machine Screw (M3*6) ⚫ 1× User Manual 2. Panel Description SELECT... - Page 11 User Manual PT-SW-U324 Name Function Description Downlink USB-C ports, with output power 5V/1.5A. DEVICES Connect to USB devices such as USB 3.x (1/2) camera or hard disk. Downlink USB-A ports, with output power 5V/1A. DEVICES Connect to USB devices such as USB 3.x (3/4) camera or hard disk.
-
Page 12: Specification
User Manual PT-SW-U324 3. Specification Technical USB Protocol USB 3.2 Gen 1 Transfer Rate 5Gbps Transmission 1.5m/4.9ft over USB cable Distance IEC 61000-4-2: ±8kV (Air-gap discharge), Protection ±4kV (Contact discharge) Connection 2× USB HOST [USB 3.2 Gen 1 Type B, 9-pin... - Page 13 User Manual PT-SW-U324 Mechanical Housing Metal Enclosure Color Black Dimensions 125mm (W) × 80mm (D) × 30mm (H) Weight 317g Input: AC 100-240V 50/60Hz, Power Output: DC 12V/3A Supply (US/EU standard, CE/FCC/UL certified) Power 30W (Max) Consumption Operation 32 ~ 104°F / 0 ~ 40°C...
-
Page 14: Api Commands
User Manual PT-SW-U324 4. API Commands The product also supports RS-232 command control. Connect the RS-232 port to the appropriate cable and your control device. Then open a Serial Command tool on PC to send ASCII commands to control the product. - Page 15 User Manual PT-SW-U324 Command Function Example Feedback Default Sure to RESET to default Reset to factory settings? set reset set reset Input 1 defaults Type "Yes" after next prompt to confirm... Please refer to the note get status Get system status get status at the end of the list.
- Page 16 User Manual PT-SW-U324 Command Function Example Feedback Default Set auto- switching on/ autoswitch off (USB 5V autoswitch autoswitch detection) x=On, Off Get auto- Autoswitch autoswitch switching status autoswitch Set USB device output (x=0~4) 5V to y x=[0...4]:0:All, 1:USB-C 1, Set all USB...
- Page 17 User Manual PT-SW-U324 Note: The feedback of the command of “r status” is as follow. ======================================= Status Info 2x4 USB 3.2 Gen1 Switcher FW 1.0.0 AutoSwitch Input Input Cable Connected None Output USB_5V Follow_host Follow_host Follow_host Follow_host =======================================...
-
Page 18: System Diagram
User Manual PT-SW-U324 5. System Diagram Usage Precaution Make sure all components and accessories included ⚫ before installation. ⚫ System should be installed in a clean environment with proper temperature and humidity. ⚫ All of the power switches, plugs, sockets, and power cords should be insulated and safe. -
Page 19: Firmware Upgrade
User Manual PT-SW-U324 6. Firmware Upgrade Please follow the steps as below to upgrade firmware via the RS-232 port. 1. Prepare the PC tool (.exe) and the latest upgrade file (.bin) on PC. 2. Connect the RS-232 port on the switcher to the PC. - Page 20 User Manual PT-SW-U324 6. Click "Open" to select the prepared upgrade file, and then click "Upgrade". 7. Upgrade is completed.
-
Page 21: After-Sales Service
User Manual PT-SW-U324 7. After-Sales Service If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). - Page 22 User Manual PT-SW-U324 The product model showed on the warranty card ⚫ does not match with the model of the product for repairing or had been altered. Damage caused by force majeure. ⚫ Servicing not authorized by distributor. ⚫ Any other causes which does not relate to a ⚫...
-
Page 23: Asking For Assistance
User Manual PT-SW-U324 Asking for Assistance Technical Support: Phone: +49 5971 800299 - 0 Fax: +49 5971 800299 – 99 Technical Support Hours: 8:30 AM to 5:00 PM Monday thru Thursday 8:30 AM to 4:00 PM Friday Write to: PureLink GmbH Von-Liebig-Straße 10...
Need help?
Do you have a question about the PT-SW-U324 and is the answer not in the manual?
Questions and answers