Data Harvest EASYSENSE VISION User Manual page 14

EASYSENSE VISION User guide
Care & maintenance

VISION is designed to be operated on a desk or hand held.

Wipe clean with a lint-free soft dry cloth e.g. a microfiber cloth that is specifically designed to
clean glass.

Do not use any liquid or cleaning agent.

A standard SONY PSP LCD clear Screen Protector (not PSP Go) can be utilised to protect the
screen from surface scratches.

VISION is not water or shower proof. If it is to be used in an environment where it could get
wet, precautions must be taken to ensure that liquid cannot enter the unit.
Note: If placed in a waterproof housing e.g. a plastic box, ensure that condensation does not make contact
with VISION.

VISION is suitable for use in temperature ranges of 5 to 50˚C and 0 to 95% RH (non-
condensing).

If VISION has been left in the cold, let it warm to near room temperature before use.

Do not subject to extreme heat or cold. Do not expose to direct sunlight for extended periods of
time. Do not expose to temperatures greater than 60˚C, e.g. near a heater or inside a car in hot
weather.
Troubleshooting
Should VISION fail to respond or before reporting a fault please attempt a reset, which is available at
two levels.

Reset – to restart VISION – saved data will be safe, but any unsaved data will be lost.

Factory Reset – this will reset VISION to its factory settings. All user memory will be cleared (user
created data and setup files will be erased).
1. Select System Settings from the Settings menu.
2. From the Troubleshooting section select either Reset or Factory
Reset and say Yes to the warning message.
3. VISON will automatically reset and the start-up screen will appear.
There are no serviceable parts inside VISION. If you are experiencing a
problem, please contact Data Harvest.
Please provide details of:

The type of unit being used i.e. VISION.

A description of the problem being encountered.

The VISION's software and firmware version numbers (available from Help ► About).

If being used with a PC, the computer platform with which it is being used and the EasySense PC
software's version number.
If the problem is encountered when in use with a computer, please telephone from a location
where you can operate VISION and the computer.
Note: Dismantling VISION will invalidate the warranty and may render the unit un-repairable.
 Data Harvest Group Ltd.
14
D0233 (7)