Data Harvest EASYSENSE V-Log User Manual

Data Harvest EASYSENSE V-Log User Manual

Hide thumbs Also See for EASYSENSE V-Log:

Advertisement

Quick Links

EASYSENSE V-Log
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EASYSENSE V-Log and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Data Harvest EASYSENSE V-Log

  • Page 1 EASYSENSE V-Log User Guide...
  • Page 2: Table Of Contents

    Licensee's premises. Data Harvest's policy is to continually improve products and services, so we reserve the right to make changes without notice. It is acknowledged that there may be errors or omissions in this publication for which responsibility cannot be assumed.
  • Page 3: Getting To Know Your V-Log Data Logger

    DS133 (5) Getting to know your V-Log data logger Charge EASYSENSE V-Log fully before first use Connect V-Log directly to a USB port on your computer*, or a powered USB hub, or a USB mains charger that outputs 5 V at 1 A or more, using the USB cable supplied. A full charge can take up to 8 hours.
  • Page 4: Sensors

    100k lx ▲ Select to choose that range. Select to exit the sensor option window, then again to return to the Meters window.  Data Harvest Group Ltd, 2014...
  • Page 5: Ways To Capture Data With V-Log

    Two lines ▌▌ (bottom right) indicate that the display is paused  Data Harvest Group Ltd, 2014...
  • Page 6: Pictogram

    Press stop to exit, then either enter to confirm your choice or stop to continue logging ▼ 48.8 Press the enter button to view a EasyLog logging summary, press enter again to return to the EasyLog screen ˚C 24.0  Data Harvest Group Ltd, 2014...
  • Page 7: Snapshot

    Single Interrupt card 3 Speeds at A or B using:  Single Interrupt card Speed from A to B using  istance A to B Speed at A then B using:  Single Interrupt card  Data Harvest Group Ltd, 2014...
  • Page 8: Counting

    Use the enter button to toggle to a second screen if more than 3 sensors were logged.  Data Harvest Group Ltd, 2014...
  • Page 9: System

    Use to switch decimals off and on, or to change the decimal format from a full stop to a comma. Meter Text Use to choose whether the text height should be double or single height whilst in Meter mode.  Data Harvest Group Ltd, 2014...
  • Page 10: Using V-Log Connected Via Usb To Windows Pc For The First Time

    Click on OK. The program will save the selection. The text at the top right of the EasySense window will indicate that a Local Interface connection has been established.  Data Harvest Group Ltd, 2014...
  • Page 11 EasySense, so you can check the selected method of connection is correct Click on OK. The program will save the current selection. Click on the Not connected text in the top right of the EasySense window.  Data Harvest Group Ltd, 2014...
  • Page 12: V-Log In Wifi Mode

    V-Log WiFi loggers produced prior to April 2016 use 802.11b, ensure the WiFi network is b mode compatible. If a b mode module is fitted the logger’s WiFi label will just show WiFi and when you reset the logger it will flash ‘with WiFi’  Data Harvest Group Ltd, 2014...
  • Page 13 On an iPad tap on the status button ‘Not Connected’ (bottom right of the screen), on an Android tap on the connection icon (top right of the screen). Select the V-Log’s name from the list.  Data Harvest Group Ltd, 2014...
  • Page 14 To reset WiFi to its default settings Forget a Network  Select WiFi, Setup WiFi. Logger Name  Reset WiFi ► Select Advanced Setup and enter DHG2020 as the password. ▲  Select Reset WiFi, enter and confirm your choice.  Data Harvest Group Ltd, 2014...
  • Page 15: Wifi Specifications

     Channels supported: 1 to 11 *V-Log WiFi will automatically detect and use the required security protocol. Hereby, Data Harvest Group Ltd., declares that V-Log WiFi is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
  • Page 16: When Connecting To A Windows Computer

    * If auto install fails, download and unzip the drivers for the Bluetooth USB adaptor (Product 2070 or 2071) from the Data Harvest website. Open Device Manager, right click on the entry for the dongle (typically listed under Other devices) and select Update drivers. Select to ‘Browse my computer’ (install manually), locate and select the BLED112 directory.
  • Page 17: Hard Reset

    If the hard reset has been done correctly, the LCD will display EASYSENSE V-Log and the version number of its operating system before returning to the main menu. If V-Log still fails to respond, please contact Data Harvest.

Table of Contents