Operation Instructions - HOMCOM KY-26/07C Manual

Operation Instructions

1. Working mode function
KF: The equipment has three modes: Cool mode, Dehu mode and Fan mode.
1.1. Cool mode:
Allowable temperature setting range: 63
The " " on the display shows the set temperature;
The cooling indicator is on;
You can choose high speed wind or low speed wind.
1.2. Dehu mode:
Temperature/humidity cannot be set;
The " " on the display shows "dH";
The wind speed can't be set, and the wind is always low;
The defrosting indicator is on;
The equipment automatically sets working conditions according to environmental
conditions.
1.3. Fan mode:
Temperature cannot be set;
The " " on the display shows "
The defrosting indicator is on;
You can choose high speed wind or low speed wind.
2. Timing function
Set the timed startup in the standby (shutdown) state and the timed shutdown in the
startup state;
Timing setting range: You can set the timed startup or shutdown within 24 hours;
Timed startup/shutdown setting method:
Startup/shutdown state: Press the "Timing" key to enter the timing check or setting state,
and the " " timing indicator icon "Timing" flashes. When the timing is invalid, "
displayed, and when the timing is valid, the remaining time of the timing is displayed. At
this time, press the "
there is no operation or any other key except "
during the flashing of the timing indicator, the current displayed value will be automatically
confirmed as the set time, the timing setting state will be exited, and the displayed value
under the corresponding working mode or working state will be returned; When the timing
is valid, the timing indicator icon "Timing" lights up. After the timing is confirmed for 5
seconds, it will return to the displayed value under the corresponding working mode or the
working state.
" ;
" or " " key to adjust the set time with an interval of 1 hour. If
- 86 ;
" and "
6
" is pressed within 5 seconds
" is