IMPORTANT SAFEGUARDS 1. Ensure the voltage and frequency matches the voltage on the appliance rating label. 2. Before using, ensure the power cord and plug work properly. If the power cord or plug is damaged, it must be replaced by the manufacturer or qualified persons to avoid a hazard.
Installing Chart Dust Filter Cooling Pad Back side Control Panel Ice box Outlet Louvers Water Tank Remote control Wheels CONTROL PANEL 1. ON/OFF: Press this button on the control panel or remote control to turn the unit on. It will start at a low speed and normal wind. To return to standby mode, press the button again.
Page 4
4. Timer: Press this button to set a timer between 1-7 hours. Once the time is up, the appliance will switch to standby. Each time the button is pressed, the time increases by one hour – the indicator will light on the screen. To cancel the timer, press the button until the indicator turns off.
Important! To avoid leaks, the wet curtain paper must be installed correctly. 3. Clean water tank Remove the plug, take the tank out and wash the residue inside with a towel and neuatural cleaner. Next, rinse the tank with water, then place it back into the appliance. 4.
Need help?
Do you have a question about the 824-061V70 and is the answer not in the manual?
Questions and answers