HOMCOM KY-26/07C Manual page 10

3. Sleep function
When the device is set to sleep, the wind speed automatically turns to low wind. Under the
sleep mode function, apart from sleep key, sleep status indicator and mode status indicators
slightly lit, the others lights off. In the sleep state, press the Sleep key to cancel the sleep
function, press again to wake up the device. After all the keys light up, you can normally
operate it.
4. Non-volatile memory
This equipment has the non-volatile memory.
If the equipment is turned on before power-off, it will be turned on after power-on, and keep
running with the parameters before power-off; If the equipment is turned off before power-
off, it will be turned off after power-on.
5. Water full reminder
The equipment has the following functions of automatic inspection and display of faults.
Water full alarm:
When the water tank of the equipment is full of water, the icon " " on the display of the
Full
equipment flashes, and the display shows E7, prompting the user that the water-saving
device of the equipment is full of water. At this time, the customer should power off the
equipment, discharge the water from the equipment, and restart the equipment after the
water is discharged, so that the equipment can be restored to normal work.
7