Flammable refrigerant R32 is used within the unit.
-
When maintaining or disposing the appliance, the refrigerant (R32) shall be
recovered properly, shall not discharge to air directly.
-
Compliance with national gas regulations shall be observed.
-
Keep ventilation openings clear of obstruction.
-
The unit shall be stored so as to prevent mechanical damage from occurring.
-
The unit shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation.
-
Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification. All training shall
follow the ANNEX HH requirements of UL 60335-2-40 4th Edition.
Examples for such working procedures are:
• Breaking into the refrigerating circuit;
• Opening of sealed components;
• Opening of ventilated enclosures.
-
No open fire or device like switch which may generate spark/arcing shall be
around the unit to avoid causing ignition of the flammable refrigerant used.
Please follow the instructions carefully when storing or maintaining the unit
to prevent mechanical damage from occurring.
-
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer.
-
The unit shall be stored in a room without continuously operating ignition sources
(i.e. open flames, an operating gas appliance) and ignition sources or (i.e. an
operating electric heater) close to the unit.
-
Do not pierce or burn.
-
Be aware that the refrigerants may not contain an odor.
8
Need help?
Do you have a question about the MAP05S1AWT-A and is the answer not in the manual?